General Description
The Automotive Program has been established in 1986 with the support by the sector in Bursa. Immediately after its establishment, the university-industry cooperation project between the Uludag University, Koc Holding AS Tofas integrated with the educational project has been put in context. Completed the technical infrastructure of the sector with extensive help and was met by the sector, especially the lack of teaching staff. Higher Education / World Bank project for industrial education faculty members sent abroad, education, and educational activities certified for the sector was initiated since 2009.
Vision of the automotive program, which it carries out education programs since 1986, according to current needs by continually innovating, both graduates and service production and post-levels in accordance with the industry expected to grow up in the philosophy of quality and provide manpower. Automotive Program undertaken by the mission, according to the needs of production and after-sales service sectors to provide training for staff and leading institutions in this direction is to cover the deficit.
Student graduated from Automotive Technology Programme have international diploma by title Automotive Technician.
Short Cycle
4
Specific Admission Requirements
After high school, Entrance exam of Selection and placement of students in higher education institutions in Turkey and Open admission
5
Specific arrangements for the recognition of prior learning
The provisions in “Regulation on Transfer among Associate and Undergraduate Degree Programs, Double Major, and Subspecialty and the Principals of Credit Transfer among Institutions in Higher Education Institutions” are applied.
6
Qualification Requirements and Regulations
students to obtain associate degree program in the automotive field of required and elective courses (a total of 120 ECTS) and successfully complete all of the general must be at least 2.0 weighted grade point average of 4.00.
7
Profile of The Programme
Automotive Program; automotive industry, both manufacturing and after-sales service levels and needs of qualified manpower to meet the expectations of contemporary philosophy of quality and service in order to grow in accordance with the Higher Education Program, a two-year education.
The graduates completed the program and the Automotive Technician title, manufacturing and after-sales service industry managers / engineers and workers to meet the needs of qualified staff, or between the place of business open on its behalf are qualified to run.
Automotive technicians have taken training to teach him to establish relationships with others, have the ability to hand to ensure a high level, advanced technology and modern trends in information technologies will know.
8
Key Learning Outcomes & Classified & Comparative
|
1.
Modern information required by the automotive industry, developing and changing technologies, customer expectations and to monitor and understand the importance of customer relations. To ensure customer satisfaction, service management, organization and procedures for the effective use of total quality management.
|
|
2.
Having basic knowledge of technical drawing, part drawings to make the image read, computer-aided drawing. The machine elements to make the accounts, to take measures for occupational safety and health of workers, material deformation and testing of materials to make the engine, observe the rules of the environment and human health protection
|
|
3.
Engine maintenance and repair, and mechanical operations, or to have to do.Auto electrical installations, starter and charging system to make repairs.
Battery (Battery) to do maintenance and repairs, maintenance and repair of electronic systems to the automotive, Indicators, safety and comfort systems to make maintenance and repair, heating and cooling (air conditioning), and to make maintenance and repair of ventilation systems.
|
|
4.
Energy and energy efficiency, thermodynamic laws and practices and make calculations on gas, diesel fuel injection systems to make maintenance and repair, maintenance and repair of gasoline engines, fuel and ignition systems do.
|
|
5.
Motion control systems to make maintenance repairs, maintenance repairs to the power drive train, engine testing and to set
Make maintenance and repair of emission control systems, machine elements to make the accounts, motor vehicle mechanics to make the accounts, alternative engines and fuel systems to make maintenance repairs.
|
|
6.
Use of technical language, and motor vehicle parts to measure
System / product objectives and determine the scope, the system / product related to the subject of detailed research, the system / product for the calculation / software to make
The system / product, perform, carry out activities related to professional development
|
|
7.
Profession algebraic applications, equations and inequalities, functions, trigonometry, complex numbers, exponential functions and logarithms, geometry, matrices and linear equations, limits and continuity, derivatives, integrals to related applications.
|
|
8.
Internet search engines with the Office program components, written and oral communication, report preparation techniques, communication and professional use of foreign language proficiency.
|
|
9.
Independent study, decision making, disciplinary and interdisciplinary team-work, to become professional ethical values and the quality and safety conscious.
|
|
10.
lifelong learning, continuously improve him/her self by following the technological improvements, possess the conscious of the following global problems.
|
9
Occupational Profiles of Graduates With Examples
Automotive Technicians, automotive factories, almost all of the main and sub-titles and responsibilities are involved can be considered for technician positions. But where there are intensive production and assembly lines of automotive technicians in number and they play an active role in the production, engineers, planners and managers in communication and liaison between the workers they provide, they served as team leader, quality circles, training on the job training as a teacher on the staff take responsibility.
In another part of production which are important to the automotive sector is services and sales outlets might be called post-sale service units and education centers. Automotive technicians in these units, they take responsibility for lean manufacturing production system and customer-focused quality mass production, sales increased even more as a result of the principles come to life. The team leader service manager, sales team leader, spare parts and service, workshop manager, staff in many areas of responsibility and duty to receive education.
10
Access to Further Studies
Students graduated from program can transfer to Technology Faculty and Engineering Faculty by External Transfer Exam.
11
Examination Regulations, Assessment and Grading
At the beginning of each semester and final exam, register for classes at least 70% of the courses, applications must be continued for at least 80%. Students for each course at least one midterm and final exam are subjected to. Success grade, midterm exam (as the midterm grade homework, laboratory exams, quizzes, etc. can be evaluated in the scores obtained from measuring instruments) contributed 50% and 50% in the form of contribution to the final exam. All exams are evaluated over 100 points. Final exam are required to obtain at least 30 points. A student AA, BA, BB, CB and CC has received a letter grade, students are considered successful from that course. DC and DD notes are notes that conditionally successful. DC or DD grade in a course where the student to be successful overall weighted grade point average must be at least 2.0.
Depends on lecture requirements, assessments of lectures are done by verbal and writting examinations, projects and their presentation. 4 points scaled numerical systems in 4 semesters for graduation.
12
Graduation Requirements
To complete the program successfully, all of the courses available in the program (120 ETCS) to pass to obtain Weighted grade average of 4.00 should be at least 2.0.
Full-Time
14
Address and Contact Details
Uludag Üniversitesi Teknik Bilimler Meslek Yüksekokulu,
Otomotiv Teknolojisi Programı, Görükle 16059- BURSA
Tel: 0 224 2942304
Prog.Bşk. Öğr.Gör. Ömer Özkoca
Tel: 0 224 2942343
Prof.Dr.Rıdvan Arslan
Tel: 0 224 2942341
Öğr.Gör. Bekir Erdağ
Tel: 0 224 2942343
Program support for the automotive industry, particularly TOFAŞ Co., Bosch Tic. San. Inc., Honda, Karsan, Inc. and other institutions are continuing. Currently, a permanent faculty member in the program includes 4 lecturers. Automotive Program is running a number of laboratories and the latest model with cross-sectional means the engine is electronically controlled. In addition, the simulator is running with the cross-sectional multi-point injection system engines and other equipment are available. In addition, intelligent class of 1 20 persons 35 persons and 1 private laboratory practical work can be done. In addition, the scope of the protocol that was created in 2007 by Bosch Inc. All other laboratory instruments have been used for the maintenance service and testing equipment. Automotive Program application workshop with students from public and private vehicle maintenance and servicing operations carried out in practice. At the same time practical training workshop on the engine and powertrain are also underway. Lifelong learning program in the automotive after-sales service since 2004 for the purpose of the modular certification courses for employees intensively continue..
| 1. Semester |
| Course Code |
Course Title |
Type of Course |
T1 |
U2 |
L3 |
ECTS |
| OTOZ103 |
ENGINE TECHNOLOGY |
Compulsory |
3 |
0 |
1 |
5 |
| OTOZ105 |
AUTOMOTIVE ELECTRICS |
Compulsory |
3 |
0 |
1 |
4 |
| OTOZ107 |
WORK SECURITY |
Compulsory |
3 |
1 |
0 |
4 |
| OTPS010 |
INFORMATION AND COMMUNICATION TECHNOLOGY |
Compulsory |
2 |
0 |
1 |
3 |
| OTPZ101 |
MATHEMATICS FOR TECHNICIANS I |
Compulsory |
3 |
0 |
0 |
4 |
| OTPZ103 |
PHYSICS |
Compulsory |
3 |
0 |
0 |
4 |
| ATA101 |
ATATURK'S PRINCIPALS AND HISTORY OF REVOLUTIONS I |
Compulsory |
2 |
0 |
0 |
2 |
| TUD101 |
TURKISH LANGUAGE I |
Compulsory |
2 |
0 |
0 |
2 |
| YAD101 |
FOREIGN LANGUAGE |
Compulsory |
2 |
0 |
0 |
2 |
| Total |
|
30 |
| 2. Semester |
| Course Code |
Course Title |
Type of Course |
T1 |
U2 |
L3 |
ECTS |
| OMPZ002 |
MATERIAL TECHNOLOGY |
Compulsory |
2 |
0 |
0 |
3 |
| OTOZ108 |
AUTOMOTIVE ELECTRONICS |
Compulsory |
3 |
0 |
1 |
4 |
| OTOZ110 |
TECHNICAL DRAWING |
Compulsory |
3 |
1 |
0 |
4 |
| OTOZ112 |
SPARK IGNITION ENGINES |
Compulsory |
3 |
0 |
1 |
5 |
| OTPZ102 |
MATHEMATICS FOR TECHNICIANS II |
Compulsory |
2 |
0 |
0 |
2 |
| ATA102 |
ATATURK'S PRINCIPLES AND THE HISTORY OF REVOLUTIONS II |
Compulsory |
2 |
0 |
0 |
2 |
| TUD102 |
TURKISH LANGUAGE II |
Compulsory |
2 |
0 |
0 |
2 |
| YAD102 |
FOREIGN LANGUAGE |
Compulsory |
2 |
0 |
0 |
2 |
|
Click to choose optional courses.
|
|
|
|
|
6 |
| Total |
|
30 |
| 3. Semester |
| Course Code |
Course Title |
Type of Course |
T1 |
U2 |
L3 |
ECTS |
| OMPZ009 |
MACHINE ELEMENTS |
Compulsory |
2 |
0 |
0 |
2 |
| OTOZ201 |
MOTION CONTROL SYSTEMS |
Compulsory |
3 |
0 |
1 |
4 |
| OTOZ203 |
POWER TRAIN SYSTEMS |
Compulsory |
3 |
0 |
1 |
4 |
| OTOZ211 |
DIESEL ENGINES |
Compulsory |
3 |
0 |
1 |
4 |
| TBMYO1 |
SUMMER PRACTICE-I |
Compulsory |
0 |
0 |
0 |
4 |
|
Click to choose optional courses.
|
|
|
|
|
12 |
| Total |
|
30 |
| 4. Semester |
| Course Code |
Course Title |
Type of Course |
T1 |
U2 |
L3 |
ECTS |
| OTOZ202 |
ENGINE TEST AND TUNING |
Compulsory |
2 |
0 |
2 |
3 |
| OTOZ204 |
VEHICLES MECHANICS |
Compulsory |
3 |
0 |
1 |
4 |
| OTOZ206 |
ALTERNATIVE ENGINES AND FUELS |
Compulsory |
3 |
0 |
1 |
4 |
| OTOZ210 |
COMFORT SYSTEMS |
Compulsory |
2 |
0 |
0 |
3 |
| TBMYO2 |
SUMMER PRACTICE-II |
Compulsory |
0 |
0 |
0 |
4 |
|
Click to choose optional courses.
|
|
|
|
|
12 |
| Total |
|
30 |
| 2. Semester Optional Courses |
| Course Code |
Course Title |
Type of Course |
T1 |
U2 |
L3 |
ECTS |
| OTOS209 |
SYSTEM ANALYSIS AND DESING I |
Optional |
2 |
0 |
0 |
3 |
| OTPS001 |
OCCUPATIONAL HEALTH AND SAFETY |
Optional |
2 |
0 |
0 |
3 |
| OTPS006 |
RESEARCH METHODS AND TECHNIQUES |
Optional |
2 |
0 |
0 |
3 |
| OTPS013 |
ENGINEERING SCIENCE |
Optional |
2 |
0 |
0 |
3 |
| 3. Semester Optional Courses |
| Course Code |
Course Title |
Type of Course |
T1 |
U2 |
L3 |
ECTS |
| OTOS201 |
HEATING AND COOLING SYSTEMS |
Optional |
2 |
0 |
0 |
3 |
| OTOS203 |
MEASUREMENT TECHNOLOGY |
Optional |
2 |
0 |
0 |
3 |
| OTOS205 |
HYDRALICS AND PNOMATICS SYSTEMS |
Optional |
2 |
0 |
0 |
3 |
| OTOS207 |
SERVICE QUALITY |
Optional |
2 |
0 |
0 |
3 |
| OTOS211 |
AUTOMOTIVE MATERIAL TECNOLOGY |
Optional |
2 |
0 |
0 |
3 |
| OTOS213 |
WORKPLACE TRAINING I |
Optional |
0 |
16 |
0 |
12 |
| OTOS214 |
SYSTEM ANALYSIS AND DESING II |
Optional |
2 |
0 |
0 |
3 |
| OTPS003 |
FIRST AID |
Optional |
2 |
0 |
0 |
3 |
| OTPS005 |
QUALITY ASSUARANCE AND STANDARDS |
Optional |
2 |
0 |
0 |
3 |
| OTPS009 |
COMMUNICATION |
Optional |
2 |
0 |
0 |
3 |
| OTPS011 |
BUSINES MANAGEMENT I |
Optional |
2 |
0 |
0 |
3 |
| 4. Semester Optional Courses |
| Course Code |
Course Title |
Type of Course |
T1 |
U2 |
L3 |
ECTS |
| OTOS202 |
COMPUTER AIDET DESING |
Optional |
1 |
0 |
2 |
3 |
| OTOS204 |
CAROSERY PAINTING TECHNOLOGY |
Optional |
1 |
0 |
2 |
3 |
| OTOS208 |
AUTO DAMAGE APPRAISAL |
Optional |
1 |
0 |
2 |
3 |
| OTOS210 |
EMISSION CONTROL SYSTEMS |
Optional |
1 |
0 |
2 |
3 |
| OTOS212 |
VOCATIONAL FOREIGN LANGUAGE |
Optional |
2 |
0 |
0 |
3 |
| OTOS214 |
PROFESSIONAL ETHICS |
Optional |
2 |
0 |
0 |
3 |
| OTOS216 |
WORKPLACE TRAINING II |
Optional |
0 |
16 |
0 |
12 |
| OTPS002 |
ENVIRONMENTAL PROTECTION |
Optional |
2 |
0 |
0 |
3 |
| OTPS004 |
QUALITY MANAGEMENT SYSTEMS |
Optional |
2 |
0 |
0 |
3 |
| OTPS012 |
BUSINES MANAGEMENT II |
Optional |
2 |
0 |
0 |
3 |
| OTPS013 |
ENTER PRISTING |
Optional |
2 |
0 |
0 |
3 |
