General Description
Automotive Engineering Department was established in 2010 and was started to give education on master of science degree in 2011 and Ph.D. degree in 2013. The Department offers programs to qualified students for further education and research at advanced level, leading to the degrees of MSc, integrated PhD and Ph.D in Automotive Engineering.
The Doctorate (Ph. D.) Degree in Automotive Engineering Program is awarded to the graduates who have successfully completed all courses in the curriculum.
Third Cycle
4
Specific Admission Requirements
Master school certificate is required. Bachelor´s degree candidates can apply to the integrated PhD program. The application conditions, evaluation, required documents, exams and registration issues for the Ph.D. program are announced on the University website.
5
Specific arrangements for the recognition of prior learning
The provisions in “Regulation on Transfer among Associate and Undergraduate Degree Programs, Double Major, and Subspecialty and the Principals of Credit Transfer among Institutions in Higher Education Institutions” are applied.
6
Qualification Requirements and Regulations
Students who are accepted to the doctorate program with a master´s degree with thesis must be successful at least 240 ECTS in order to graduate.This credit load must be at least eight courses and seminars during the course, provided that it is not less than 60 ECTS for an academic year. The remaining load must be provided from the seminar, proficiency exam and thesis work after the course phase.
The graduation requirement for the students in the integrated doctorate program consists of a total of at least 300 ECTS credits, including at least fourteen courses, seminars, proficiency exam and thesis work. All students are required to prepare a thesis and defend it against a jury.
In order for the student to graduate, it is also required to fulfill the publication or scientific activity requirement determined by the decision of the Senate.
7
Profile of The Programme
The objectives of the Automotive Engineering Doctor of Philosophy Program are to educate undergraduates to acquire knowledge and skills in automotive related issues especially in design and manufacturing and also to provide skills, in order to fulfill the needs and expectations of automotive industry and society and to play a leadership role in their economic and cultural advancement for the benefit of society providing world-class knowledge and education, showing continuous self-improvement in education and regarding as a well-known qualified program. Automotive Engineering Doctor of Philosophy Program aims to support development of automotive field in Bursa and in Turkish industry regarding the development of scientific advances and requirements of University-Industry cooperation.
The objectives of the Automotive Engineering Doctor of Philosophy Program are to educate undergraduates to acquire knowledge and skills in automotive related issues especially in design and manufacturing and also to provide skills, in order to fulfill the needs and expectations of automotive industry and society and to play a leadership role in their economic and cultural advancement for the benefit of society providing world-class knowledge and education, showing continuous self-improvement in education and regarding as a well-known qualified program. Automotive Engineering Doctor of Philosophy Program aims to support development of automotive field in Bursa and in Turkish industry regarding the development of scientific advances and requirements of University-Industry cooperation.
Department participates in exchange programs including the Erasmus program with universities which are contracted.
Department participates in exchange programs including the Erasmus program with universities which are contracted.
8
Key Learning Outcomes & Classified & Comparative
|
1.
To be able to deepen the information gained in B.Sc. and MSc educations and make the practical use of them in automotive engineering area.
|
|
2.
To be able to improve the abilities of analyse, synthesis and judgemental evaluation in order to solve complex problem independantly.
|
|
3.
To be able to design a process or a system by using modern design methodology and tools.
|
|
4.
To be able to gather data, evaluate and interprete by using scientific methods.
|
|
5.
To be able to find complete solutions by taking part in multi-disciplinary teams and combining the information obtained.
|
|
6.
To be able to express the aggregation his/her knowledge in oral and written forms effectively, to communicate at least in one foreign language.
|
|
7.
To be able to renew himself/herself continually by considering technical improvements
|
|
8.
To be able to take social, environmental and ethical values into consideration in scientific researches
|
|
9.
To be able to make project planning and time management and find alternative ways
|
|
10.
To be able to acquire the ability to make original and independent research in automotive engineering area.
|
9
Occupational Profiles of Graduates With Examples
Automotive Engineering Ph.D. program Graduates can work in the wide range of automotive industry organizations, R&D (Research and Development) firms, consulting companies, manufacturing industry, transportation systems, defense and aerospace industry, and in a wide variety of private and public sectors and firms in international and national organizations.
10
Access to Further Studies
Graduates who successfully completed doctorate degree may apply to both in the same or related disciplines in higher education institutions at home or abroad to get a position in academic staff or to governmental R&D centers to get expert position.
11
Examination Regulations, Assessment and Grading
Bursa Uludağ University Postgraduate Education and Training Regulation is applied.
12
Graduation Requirements
Students who are accepted to the doctorate program with a master´s degree with thesis must be successful at least 240 ECTS in order to graduate.This credit load must be at least eight courses and seminars during the course, provided that it is not less than 60 ECTS for an academic year. The remaining load must be provided from the seminar, proficiency exam and thesis work after the course phase.
The graduation requirement for the students in the integrated doctorate program consists of a total of at least 300 ECTS credits, including at least fourteen courses, seminars, proficiency exam and thesis work. All students are required to prepare a thesis and defend it against a jury.
In order for the student to graduate, it is also required to fulfill the publication or scientific activity requirement determined by the decision of the Senate.
Full-Time
14
Address and Contact Details
Program Başkanı
Prof. Dr. Ferruh ÖZTÜRK
Bursa Uludağ Üniversitesi Mühendislik Fakültesi Otomotiv Mühendisliği Bölümü Görükle Kampüsü Nilüfer/BURSA 16059 BURSA
Tel:+90 (224) 2942600
E-posta: ferruh@uludag.edu.tr
Bologna Koordinatörü
Doç. Dr. Zeliha KAMIŞ KOCABIÇAK
Bursa Uludağ Üniversitesi Mühendislik Fakültesi Otomotiv Mühendisliği Bölümü Görükle Kampüsü Nilüfer/BURSA 16059 BURSA
Tel:+90 (224) 2941992
E-posta: zkamis@uludag.edu.tr
In 2011, the Automotive Engineering Department moved to the new modern building which includes offices, lecture rooms, laboratories and a modern conference room. In Automotive Engineering Department, education and research studies are carried out through four branches as Vehicle Design, Vehicle Dynamics and Control, Vehicle Propulsion and Power Systems, Vehicle Transport Systems. Most of the courses require the students to implement their projects and homeworks on modern high performance computing systems. Department has 6 Professor, 4 Associate Professors, 3 Assistant Professors, 7 Research Assistant. The department is proud to be a pioneer department for Turkey, as being one of the first of its kind in Turkey, it will lead many activities in automotive fields and it will successfully continue to attain the three goals of its mission; education, research and public service.
| 1. Semester |
| Course Code |
Course Title |
Type of Course |
T1 |
U2 |
L3 |
ECTS |
| OTO6101 |
AUTOMOTIVE DESIGN, MANUFACTURING AND PROJECT MANAGEMENT |
Compulsory |
3 |
0 |
0 |
6 |
| OTO6181 |
PHD SPECIALISED FIELD COURSE I |
Compulsory |
4 |
0 |
0 |
5 |
| OTO6191 |
THESIS CONSULTING I |
Compulsory |
0 |
1 |
0 |
1 |
|
Click to choose optional courses.
|
|
|
|
|
18 |
| Total |
|
30 |
| 2. Semester |
| Course Code |
Course Title |
Type of Course |
T1 |
U2 |
L3 |
ECTS |
| FEN6000 |
RESEARCH TECHNIQUES AND PUBLICATION ETHICS |
Compulsory |
2 |
0 |
0 |
2 |
| OTO6172 |
SEMINAR |
Compulsory |
0 |
2 |
0 |
4 |
| OTO6182 |
PHD SPECIALISED FIELD COURSE II |
Compulsory |
4 |
0 |
0 |
5 |
| OTO6192 |
THESIS CONSULTING II |
Compulsory |
0 |
1 |
0 |
1 |
|
Click to choose optional courses.
|
|
|
|
|
18 |
| Total |
|
30 |
| 3. Semester |
| Course Code |
Course Title |
Type of Course |
T1 |
U2 |
L3 |
ECTS |
| OTO6183 |
PHD SPECIALISED FIELD COURSE III |
Compulsory |
4 |
0 |
0 |
5 |
| OTO6193 |
THESIS CONSULTING III |
Compulsory |
0 |
1 |
0 |
15 |
| YET6177 |
PHD PROFICIENCY EXAMINATION |
Compulsory |
0 |
0 |
0 |
10 |
| Total |
|
30 |
| 4. Semester |
| Course Code |
Course Title |
Type of Course |
T1 |
U2 |
L3 |
ECTS |
| OTO6184 |
PHD SPECIALISED FIELD COURSE IV |
Compulsory |
4 |
0 |
0 |
5 |
| OTO6194 |
THESIS CONSULTING IV |
Compulsory |
0 |
1 |
0 |
25 |
| Total |
|
30 |
| 5. Semester |
| Course Code |
Course Title |
Type of Course |
T1 |
U2 |
L3 |
ECTS |
| OTO6185 |
PHD SPECIALISED FIELD COURSE V |
Compulsory |
4 |
0 |
0 |
5 |
| OTO6195 |
THESIS CONSULTING V |
Compulsory |
0 |
1 |
0 |
25 |
| Total |
|
30 |
| 6. Semester |
| Course Code |
Course Title |
Type of Course |
T1 |
U2 |
L3 |
ECTS |
| OTO6186 |
PHD SPECIALISED FIELD COURSE VI |
Compulsory |
4 |
0 |
0 |
5 |
| OTO6196 |
THESIS CONSULTING VI |
Compulsory |
0 |
1 |
0 |
25 |
| Total |
|
30 |
| 7. Semester |
| Course Code |
Course Title |
Type of Course |
T1 |
U2 |
L3 |
ECTS |
| OTO6187 |
PHD SPECIALISED FIELD COURSE VII |
Compulsory |
4 |
0 |
0 |
5 |
| OTO6197 |
THESIS CONSULTING VII |
Compulsory |
0 |
1 |
0 |
25 |
| Total |
|
30 |
| 8. Semester |
| Course Code |
Course Title |
Type of Course |
T1 |
U2 |
L3 |
ECTS |
| OTO6188 |
PHD SPECIALISED FIELD COURSE VIII |
Compulsory |
4 |
0 |
0 |
5 |
| OTO6198 |
THESIS CONSULTING VIII |
Compulsory |
0 |
1 |
0 |
25 |
| Total |
|
30 |
| 1. Semester Optional Courses |
| Course Code |
Course Title |
Type of Course |
T1 |
U2 |
L3 |
ECTS |
| OTO6111 |
VEHICLE CRASH ANALYSIS METHODS |
Optional |
3 |
0 |
0 |
6 |
| OTO6113 |
THE USAGE OF ADVANCED MATERIALS IN VEHICLES |
Optional |
3 |
0 |
0 |
6 |
| OTO6115 |
COMPUTATIONAL FLUID DYNAMICS METHODS OF VEHICLES |
Optional |
3 |
0 |
0 |
6 |
| OTO6117 |
MECHATRONICS IN AUTOMOTIVE ENGINEERING |
Optional |
3 |
0 |
0 |
6 |
| OTO6119 |
ADVANCED LEVEL PROGRAMMING IN AUTOMOTIVE ENGINEERING |
Optional |
3 |
0 |
0 |
6 |
| OTO6121 |
THEORY OF ELASTICITY FOR ENGINEERS |
Optional |
3 |
0 |
0 |
6 |
| OTO6123 |
FUEL INJECTION SYSTEMS |
Optional |
3 |
0 |
0 |
6 |
| OTO6125 |
RELIABILITIY AND LIFE CALCULATIONS IN AUTOMOTIVE DESIGN |
Optional |
3 |
0 |
0 |
6 |
| 2. Semester Optional Courses |
| Course Code |
Course Title |
Type of Course |
T1 |
U2 |
L3 |
ECTS |
| OTO6112 |
CONTROL SYSTEMS IN AUTOMOTIVE ENGINEERING |
Optional |
3 |
0 |
0 |
6 |
| OTO6114 |
VEHICLE BRAKING SYSTEMS |
Optional |
3 |
0 |
0 |
6 |
| OTO6116 |
SPECIAL TOPICS IN AUTOMOTIVE ENGINEERING |
Optional |
3 |
0 |
0 |
6 |
| OTO6118 |
EMISSION CONTROL AND MONITORING |
Optional |
3 |
0 |
0 |
6 |
| OTO6120 |
AUTOMOTIVE COMPOSITES AND SANDWICH STRUCTURES |
Optional |
3 |
0 |
0 |
6 |
| OTO6124 |
DESIGNING OF ELECTRONIC CONTROL UNITS FOR VEHICLES |
Optional |
3 |
0 |
0 |
6 |
| OTO6126 |
DAMAGE ANALYSIS OF VEHICLES |
Optional |
3 |
0 |
0 |
6 |
| OTO6128 |
THEORY OF FRACTURE MECHANICS AND APPLICATIONS |
Optional |
3 |
0 |
0 |
6 |
| OTO6130 |
THEORY OF PLASTICITY AND APPLICATIONS |
Optional |
3 |
0 |
0 |
6 |
| OTO6132 |
SHEET METAL FORMING IN AUTOMOTIVE |
Optional |
3 |
0 |
0 |
6 |
