Bilgi Paketi & Ders Kataloğu
Türkçe English Curriculum Key Learning Outcomes
Additive Manufacturing Doctorate Program (Interdisciplinary)
General Description
1
Brief History
nterdisciplinary Additive Manufacturing doctoral Program was opened in the Fall Semester of 2022-2023 and started education. The program has been created with an interdisciplinary content. It is the first doctoral graduate program in this field in Turkey. In addition to the core courses in Additive Manufacturing, it also includes courses in Optical and Photonics, Biomaterials, Automotive Engineering, Polymer Materials and Surface Treatment and Technologies doctoral programs.
2
Qualification Awarded
When the Additive Manufacturing doctoral program is successfully completed and the program qualifications are met, Doctor of Philisophy degree in Additive Manufacturing is obtained.
3
Level of Qualification
Third Cycle
4
Specific Admission Requirements
In order to apply for the doctoral, candidates must have ALES or an equivalent score determined by the Senate, not less than 55 (fifty-five) points from the ALES or equivalent exam. Foreign language scores are not required for doctoral applications, but candidates with equal scores will be preferred with a higher English score. The program is an interdisciplinary program. Students can be accepted from Additive Manufacturing, Mechanical Engineering, Automotive Engineering, Aeronautical Engineering, Aerospace Engineering, Aerospace Engineering and Materials Engineering Master of Science programs.
5
Specific arrangements for the recognition of prior learning
The provisions in “Regulation on Transfer among Associate and Undergraduate Degree Programs, Double Major, and Subspecialty and the Principals of Credit Transfer among Institutions in Higher Education Institutions” are applied.
6
Qualification Requirements and Regulations
The program provided a total of not less than 7 selective courses (42 ECTS), a compulsory course (2 ECTS), Phd proficiency examination (10 ECTS), one seminar (4 ECTS) , thesis and dissertation defence. Consists of compulsory and elective courses in graduate courses. 240 ECTS total number of credits of the program. In order to be successful in the course concerned student has to score at least 75 out of 100, which are mandatory. Students who have the relevant conditions are awarded to Doctoral in Additive Manufacturing.
7
Profile of The Programme
Additive Manufacturing doctoral programme is an interdisciplinary program. There are 6 faculty members working in different departments in its academic staff. Apart from the academic staff of the Additive Manufacturing doctoral programme, other faculty members give lectures and receive student counseling.
8
Key Learning Outcomes & Classified & Comparative
1. To be able to put the information from the field of deepening manufacturing.
2. To be able to solve complex by developing analysis, synthesis, comparison.
3. Being able to design a process or a system using modern design teaching and tools.
4. Can collect, evaluate and interpret data using remediation.
5. Analyzing analysis targeting within teams in a wide variety of domains.
6. To be able to describe a scientifically active scholar in writing and in a dictionary, communication in at least one language.
7. To be able to renew oneself scientifically.
8. It can be thought of from the example in terms of content and ethics.
9. Understanding the project and time, finding a solution.
10. Being original and independent
9
Occupational Profiles of Graduates With Examples
Students who will graduate from the Additive Manufacturing doctoral program will have the opportunity to work in companies operating in the Machinery, Automotive, Aerospace, Defense and Medical sectors.
10
Access to Further Studies
Graduates who have successfully completed their doctorate may apply to the same or related disciplines in order to become academic staff in the country or abroad or to take a specialist position in state-affiliated R&D centers.
11
Examination Regulations, Assessment and Grading
Bursa Uludag University Postgraduate Education Regulation is applied.
12
Graduation Requirements
Students must successfully pass all compulsory and elective courses on the program (equivalent to a total of 180-240 ECTS) mention about "Qualification Requirements and Regulations". And who have successfully completed all courses in the curriculum will be given The Doctorate Degree in Additive Manufacturing Program.
13
Mode of Study
Full-Time
14
Address and Contact Details
Program Başkanı:
Prof. Dr. Necmettin Kaya
Tel:+90 (224) 2941979
E-posta: necmi@uludag.edu.tr
İdari personel:
Esra Bozkurt
0 (224) 294 1952
makfen@uludag.edu.tr
Adres:
Bursa Uludağ Üniversitesi Mühendislik Fakültesi Makine Mühendisliği Bölümü Görükle Kampüsü 16059 BURSA
15
Facilities
Courses are held in 18 classrooms that are shared with the Mechanical Engineering Department. These classes have the necessary features for a contemporary engineering education. All of these classrooms are equipped with air conditioners and projectors. There are 9 laboratories used for education and research activities in the department. These laboratories are listed below:
Thermodynamics and Heat Techniques Laboratory,
Machine Theory and Dynamics Laboratory,
Automatic Control Laboratory,
Engine Lab,
Materials Laboratory,
Machine Tools Laboratory,
Machine Elements Laboratory,
Fluid Mechanics Laboratory,
Computer Aided Design Laboratory.
16
Curriculum
1. Semester
Course Code Course Title Type of Course T1 U2 L3 ECTS
EIM6181 ADVANCED TOPICS IN PHD THESIS I Compulsory 4 0 0 5
EIM6191 THESIS CONSULTING I Compulsory 0 1 0 1
Click to choose optional courses. 24
Total 30
2. Semester
Course Code Course Title Type of Course T1 U2 L3 ECTS
EIM6172 SEMINAR Compulsory 0 2 0 4
EIM6182 ADVANCED TOPICS IN PHD THESIS II Compulsory 4 0 0 5
EIM6192 THESIS CONSULTING II Compulsory 0 1 0 1
FEN6002 TECHNOLOGY TRANSFER, R-D AND INNOVATION Compulsory 2 0 0 2
Click to choose optional courses. 18
Total 30
3. Semester
Course Code Course Title Type of Course T1 U2 L3 ECTS
EIM6183 ADVANCED TOPICS IN PHD THESIS III Compulsory 4 0 0 5
EIM6193 THESIS CONSULTING III Compulsory 0 1 0 15
YET6177 PHD PROFICIENCY EXAMINATION Compulsory 0 0 0 10
Total 30
4. Semester
Course Code Course Title Type of Course T1 U2 L3 ECTS
EIM6184 ADVANCED TOPICS IN PHD THESIS IV Compulsory 4 0 0 5
EIM6194 THESIS CONSULTANTS IV Compulsory 0 1 0 25
Total 30
5. Semester
Course Code Course Title Type of Course T1 U2 L3 ECTS
EIM6185 ADVANCED TOPICS IN PHD THESIS V Compulsory 4 0 0 5
EIM6195 THESIS CONSULTING V Compulsory 0 1 0 25
Total 30
6. Semester
Course Code Course Title Type of Course T1 U2 L3 ECTS
EIM6186 ADVANCED TOPICS IN PHD THESIS VI Compulsory 4 0 0 5
EIM6196 THESIS CONSULTING VI Compulsory 0 1 0 25
Total 30
7. Semester
Course Code Course Title Type of Course T1 U2 L3 ECTS
EIM6187 PHD SPECIALISED FIELD COURSE VII Compulsory 4 0 0 5
EIM6197 THESIS CONSULTING VII Compulsory 0 1 0 25
Total 30
8. Semester
Course Code Course Title Type of Course T1 U2 L3 ECTS
EIM6188 PHD SPECIALISED FIELD COURSE VIII Compulsory 4 0 0 5
EIM6198 THESIS CONSULTING VIII Compulsory 0 1 0 25
Total 30
1. Semester Optional Courses
Course Code Course Title Type of Course T1 U2 L3 ECTS
EIM6001 FUNDAMENTALS OF ADDITIVE MANUFACTURING Optional 3 0 0 6
EIM6003 METAL ADDITIONAL MANUFACTURING TECHNOLOGIES Optional 3 0 0 6
END6117 MANAGEMENT OF PRODUCT DESIGN Optional 3 0 0 7,5
MAK6201 MATERIALS CHARACTERIZATION Optional 3 0 0 6
MAK6235 LIFE CALCULATIONS IN MACHINE DESIGN Optional 3 0 0 6
2. Semester Optional Courses
Course Code Course Title Type of Course T1 U2 L3 ECTS
EIM6002 METROLOGY IN ADDITIVE AND CONVENTIONAL MANUFACTURING Optional 3 0 0 6
EIM6004 ADVANCED DESIGN METHODS FOR ADDITIVE MANUFACTURING Optional 3 0 0 6
EIM6006 METAMODELING AND AI APPLICATIONS IN ADDITIVE MANUFACTURING Optional 3 0 0 6
MAK6226 ATOMIZATION AND PULVERIZATION MECHANISMS Optional 3 0 0 6
MAK6234 RELIABILITY BASED DESIGN OPTIMIZATION AND PROGRAMMING Optional 3 0 0 6
Bologna İletişim
Mail : bologna@uludag.edu.tr
Tasarım & Kodlama
Bilgi İşlem Daire Başkanlığı © 2015
otomasyon@uludag.edu.tr