General Description
Machinery Program has started primary (formal) education in 2001 and the secondary education added to this program in 2002. The technical education continues both primary and secondary program with 170 students in 2012.
This program is subject to the 120 ECTS credits first stage degree system in the field of Machine and Metal Technology in higher education. Upon successfully completion of the qualification requirements of the associate degree program, students are awarded by the title of Machine Technician
Short Cycle
4
Specific Admission Requirements
Candidates must have high school diploma and enough score from YGS-Higher Education Transition Examination. While vocational school graduates are placed without examination high school graduates are placed with theYGS-1 score.
5
Specific arrangements for the recognition of prior learning
The provisions in “Regulation on Transfer among Associate and Undergraduate Degree Programs, Double Major, and Subspecialty and the Principals of Credit Transfer among Institutions in Higher Education Institutions” are applied.
6
Qualification Requirements and Regulations
In order to graduate from Machine and Metal Technology Technology Department-Machine Program and to get the title of Machine technician and associate degree, students must successfully complete all of the compulsory and elective courses (totally equivalent to120 ECTS) and 30 work days industry-based internship. Overall grade point average must be at least 2.00 on 4.00 scale.
7
Profile of The Programme
Efficient and right application of equipment and machinery in industrial actions are quite important. The lack of work force equipped and skilled in engineering sciences, production, mechanical design and mechanics fields with computer, analysis and design skills is high. Graduated students who have a mechanical technician title earn general knowledge and ability in the subjects such as traditional manufacturing methods, design techniques, material choice, computer-aided design and manufacturing methods. This programme intends to include all kinds of practical and theoretical aspects of the field of study and it aims to furnish students with fundamental knowledge about mechanical design, mechanical science and mechanical components to equip students with the skills required in conventional manufacturing methods, design techniques, material choice, computer-aided design and manufacturing methods.
8
Key Learning Outcomes & Classified & Comparative
|
1.
Be able to read technical and machine drawing and to design manual and computer-aided drafting.
|
|
2.
He/she has to have general knowledge related to marking and processing of the metals, Metal cutting and chipless manufacturing, and can solve the problems which will occur during the manufacturing ,Being able to use the universal machine tools
|
|
3.
Learn design, modelling, simulation and production-related operations with CAM-CAM programs, modelling with reverse engineering software, Having the ability of using CNC machines, creating programs and making manufacturing or production.
|
|
4.
Being able to recognize the materials, to research the materials and their internal structure, to examine the materials , knowing the thermal processes and being able to apply thermal processes to materials.
|
|
5.
Knowing measurement processes, controlling equipment and tools. Being capable of using them during and after the manufacturing process and controlling quality departments and contributing to production processes.
|
|
6.
Knowing the working principles of Hydraulic - Pneumatic systems and being able to recognize Hydraulic - Pneumatic elements , being able to understand circuit diagrams, Having the ability of making to do of Hydraulic - Pneumatic circuit design and calculations, having the capability to perform periodic maintenance and repairs.
|
|
7.
Being able to recognize machine parts ,which is used at machine design, and their characteristics, being able to do force and resistance calculations of simple mechanical tools and simple mechanisms and molds and models with mathematical formulae ,Being able to create dimensional structure of machine parts.
|
|
8.
To evaluate the information obtained in the learning process by using cause-effect relationships, to predict what information where, when and why to be needed.
|
|
9.
Being aware of the importance of occupational health and safety, complying with the rules at all times, trying to make the counter-system-analysis of risk (associated with the unit in case of emergency), doing first aid applications, having the ability to know them if necessary.
|
|
10.
Knowing the methods of mass production, using mass production machines especially for the mass production and having the ability to design elements and auxiliary apparatus.
|
|
11.
To fulfill the functions of business management, to manage the production process with simple mathematical operations, to have the ability to calculate the cost-income-expenditure, to know quality, occupational health, safety, environmental management systems and to contribute to the creation of this infrastructure in workplace.
|
|
12.
Be able to communicate with employees at all levels, to learn vocational, social and ethical values, be capable of doing the necessary research and technological facilities, to take role in team work if necessary
|
9
Occupational Profiles of Graduates With Examples
Gradutuated students can be employed in a wide range of industries such as automotive and machine industry
10
Access to Further Studies
Candidates who have completed associate degree training can study bachelor’s degree programs (engineer or technical teacher) if they get a desired grade from DGS (vertical transfer exam) and if they are placed by ÖSYM (Student selection and Placement Centre).
11
Examination Regulations, Assessment and Grading
Before the start of each semester, students must register for their courses and in order to admit to the final examinations they must be continued for at least 70% of courses and 80% of practical applications. Students are subjected to at least one midterm and final exam. For each course the instructor advises students at the beginning of each semester with regard to the requirements for midterm examinations, papers and other assignments, conditions for admission to final examinations, and the weighting of midterm examinations, assignments and other studies in the calculation of the final course grade.The course instructor assigns a grade of between 0 and 100 for each course taken by a student and this grade is known as the raw score. Students must take at least 50 on 100 for each course. A student who has received any of the AA, BA, BB, CB, CC letter grade is considered as successful in that course. DD and DC are probation passing grades. Students must have a GPA of over 2 to be successful from any course received DD or DC letter grade.
12
Graduation Requirements
To finish the program successfully, complete all the courses available in the program (120 ECTS), get a GPA at least 2.00/4.00 and complete the internship based on industry training.
Full-Time
14
Address and Contact Details
Program Başkanı: Öğr.Gör. Fatih ÖZCAN
e-mail: fatihozcan@uludag.edu.tr
Adres: Yeniköy Altı Çalılık Mevki Yeniköy- Orhangazi / BURSA
Telefon : +90 (224) 573 98 62, Faks : +90 (224) 573 98 63
Bologna Koordinatörü: Doç.Dr.Yahya IŞIK / İznik Meslek Yüksekokulu Müdürü
e-mail: yahya@uludag.edu.tr
Adres: Selçuk Mahallesi Üyüvek Mevkii Hastane Caddesi İznik / BURSA
Telefon : +90 (224) 757 6909 Faks : +90 (224) 757 1991
In our programme, academic stuff with M.Sc and Ph.D degrees work as instructor in our learning programme and Students can be developed their knowledge and skills in Computer Aided Design and Computer Aided Manufacturing area in CAD/CAM laboratory and they can also learn the basic skills of computer science in Computer laboratory.
| 1. Semester |
| Course Code |
Course Title |
Type of Course |
T1 |
U2 |
L3 |
ECTS |
| MKNZ101 |
BASIC MANUFACTURING PROCESSES |
Compulsory |
2 |
2 |
0 |
5 |
| OTPZ001 |
OCCUPATIONAL HEALTH AND SAFETY |
Compulsory |
2 |
0 |
0 |
3 |
| OTPZ101 |
MATHEMATICS FOR TECHNICIANS I |
Compulsory |
3 |
0 |
0 |
4 |
| OTPZ103 |
PHYSICS |
Compulsory |
3 |
0 |
0 |
4 |
| OTPZ107 |
TECHNICAL DRAWING |
Compulsory |
2 |
2 |
0 |
5 |
| ATA101 |
ATATURK'S PRINCIPALS AND HISTORY OF REVOLUTIONS I |
Compulsory |
2 |
0 |
0 |
2 |
| TUD101 |
TURKISH LANGUAGE I |
Compulsory |
2 |
0 |
0 |
2 |
| YAD101 |
FOREIGN LANGUAGE |
Compulsory |
2 |
0 |
0 |
2 |
|
Click to choose optional courses.
|
|
|
|
|
3 |
| Total |
|
30 |
| 2. Semester |
| Course Code |
Course Title |
Type of Course |
T1 |
U2 |
L3 |
ECTS |
| MKNZ102 |
MACHINE DRAWING |
Compulsory |
2 |
0 |
0 |
3 |
| MKNZ104 |
MANUFACTURING PROCESSES I |
Compulsory |
2 |
2 |
0 |
7 |
| MKNZ106 |
MATERIAL TECHNOLOGY |
Compulsory |
2 |
0 |
2 |
5 |
| MKNZ108 |
COMPUTER AIDED DRAWING I |
Compulsory |
2 |
0 |
2 |
4 |
| OTPZ102 |
MATHEMATICS FOR TECHNICIANS II |
Compulsory |
2 |
0 |
0 |
2 |
| ATA102 |
ATATURK'S PRINCIPLES AND HISTORY OF REVOLUTIONS II |
Compulsory |
2 |
0 |
0 |
2 |
| TUD102 |
TURKISH LANGUAGE II |
Compulsory |
2 |
0 |
0 |
2 |
| YAD102 |
FOREIGN LANGUAGE |
Compulsory |
2 |
0 |
0 |
2 |
|
Click to choose optional courses.
|
|
|
|
|
3 |
| Total |
|
30 |
| 3. Semester |
| Course Code |
Course Title |
Type of Course |
T1 |
U2 |
L3 |
ECTS |
| MIM3032 |
SUMMER PRACTICE-I |
Compulsory |
0 |
0 |
0 |
4 |
| MKNZ201 |
PRODUCTION PROCESSES II |
Compulsory |
2 |
2 |
0 |
4 |
| MKNZ203 |
COMPUTER AIDED MANUFACTURE I |
Compulsory |
2 |
0 |
2 |
4 |
| MKNZ207 |
COMPUTER AIDET DESING II |
Compulsory |
2 |
0 |
2 |
3 |
|
Click to choose optional courses.
|
|
|
|
|
15 |
| Total |
|
30 |
| 4. Semester |
| Course Code |
Course Title |
Type of Course |
T1 |
U2 |
L3 |
ECTS |
| MIM4035 |
SUMMER PRACTICE-II |
Compulsory |
0 |
0 |
0 |
4 |
| MKNZ202 |
COMPUTER AIDED MANUFACTURING-II |
Compulsory |
2 |
0 |
2 |
3 |
| MKNZ206 |
HYDRAULIC AND PNEUMATIC |
Compulsory |
2 |
0 |
2 |
4 |
| MKNZ208 |
CNC MILLING MACHINE TECHNOLOGY |
Compulsory |
2 |
0 |
2 |
4 |
|
Click to choose optional courses.
|
|
|
|
|
15 |
| Total |
|
30 |
| 1. Semester Optional Courses |
| Course Code |
Course Title |
Type of Course |
T1 |
U2 |
L3 |
ECTS |
| OTPS010 |
INFORMATION AND COMMUNICATION TECHNOLOGY |
Optional |
1 |
0 |
2 |
3 |
| OTPS046 |
OFFICE PROGRAMS |
Optional |
1 |
0 |
2 |
3 |
| 2. Semester Optional Courses |
| Course Code |
Course Title |
Type of Course |
T1 |
U2 |
L3 |
ECTS |
| MKNS110 |
MEASUREMENT AND CONTROL |
Optional |
2 |
0 |
0 |
3 |
| OTPS003 |
FIRST AID |
Optional |
2 |
0 |
0 |
3 |
| OTPS009 |
COMMUNICATION |
Optional |
2 |
0 |
0 |
3 |
| OTPS013 |
ENGINEERING SCIENCE |
Optional |
2 |
0 |
0 |
3 |
| 3. Semester Optional Courses |
| Course Code |
Course Title |
Type of Course |
T1 |
U2 |
L3 |
ECTS |
| MKNS209 |
STRENGTH OF MATERIALS |
Optional |
2 |
0 |
0 |
3 |
| MKNS211 |
CNC TURNING MACHINE TECHNOLOGY |
Optional |
2 |
0 |
0 |
3 |
| MKNS213 |
WELDING TECHNOLOGY |
Optional |
2 |
0 |
0 |
3 |
| MKNS215 |
THERMODYNAMICS |
Optional |
2 |
0 |
0 |
3 |
| MKNS219 |
WORKPLACE TRAINING I |
Optional |
0 |
16 |
0 |
12 |
| MKNS221 |
COMPUTER AIDED ANALYSIS |
Optional |
2 |
0 |
0 |
3 |
| OTPS002 |
ENVIRONMENTAL PROTECTION |
Optional |
2 |
0 |
0 |
3 |
| OTPS004 |
QUALITY MANAGEMENT SYSTEMS |
Optional |
2 |
0 |
0 |
3 |
| OTPS013 |
ENTER PRISTING |
Optional |
2 |
0 |
0 |
3 |
| OTPS021 |
VOCATIONAL FOREIGN LANGUAGE I |
Optional |
2 |
0 |
0 |
3 |
| 4. Semester Optional Courses |
| Course Code |
Course Title |
Type of Course |
T1 |
U2 |
L3 |
ECTS |
| MKNS210 |
ANUSUAL PRODUCTION METHODS |
Optional |
2 |
0 |
0 |
3 |
| MKNS212 |
REVERSE ENGINEERING AND QUALITY CONTROL |
Optional |
2 |
0 |
0 |
3 |
| MKNS214 |
WORK DIES |
Optional |
2 |
0 |
0 |
3 |
| MKNS216 |
CUTTING TOOLS TECNOLOGY |
Optional |
2 |
0 |
0 |
3 |
| MKNS220 |
WORKPLACE TRAINING II |
Optional |
0 |
16 |
0 |
12 |
| MKNZ205 |
MACHINE ELEMENTS |
Optional |
2 |
0 |
0 |
3 |
| OTPS006 |
RESEARCH METHODS AND TECHNIQUES |
Optional |
2 |
0 |
0 |
3 |
| OTPS007 |
PROFESSIONAL ETHICS |
Optional |
2 |
0 |
0 |
3 |
| OTPS022 |
VOCATIONAL FOREIGN LANGUAGE II |
Optional |
2 |
0 |
0 |
3 |
| OTPS024 |
SYSTEM ANALYSIS AND DESIGN |
Optional |
2 |
0 |
0 |
3 |
| OTPS026 |
PRESENTATION TECHNIQUES |
Optional |
1 |
2 |
0 |
3 |
